The
HZS series concrete mixing station is very common, but it consists of many equipments, and many customers do not know much about its working principle. The following is a detailed introduction to how the
HZS series concrete mixing station works.
HZS series concrete mixing station uses computer control technology to measure and display the operating parameters of the concrete batching plant in real time through sensors, hardware circuits, I/O interface circuits, display panels, etc. .
During the working process, the aggregate (gravel, sand) is loaded into the storage bin of the batching station by the loader, and is measured and given by the control system, sent to the feeding and belt conveyor hopper, and then conveyed by the feeding belt conveyor. to the hopper at the top of the mixer. At the same time, under the control of the control system, the cement is transported from the cement silo to the cement weighing hopper through the screw conveyor, and the water and additives are transported from the liquid supply system to the water and additive weighing hopper.
After all the materials are weighed, open the pneumatic door of the hopper, the pneumatic butterfly valve of the cement weighing bucket, the pneumatic butterfly valve of the fly ash weighing bucket, the pneumatic butterfly valve of the water weighing bucket, and the pneumatic ball valve of the additive weighing bucket in a certain order. After the hopper vibrator, cement weighing hopper vibrator, fly ash weighing hopper vibrator, and water inlet pipe pressurization pump, all materials enter the mixer and are stirred evenly by the mixer. After mixing, it enters the concrete conveying vehicle through the discharge door of the mixer through the discharge hopper to complete a mixing cycle.
The HZS series concrete mixing station adopts a rack-mounted chassis, and the mini-panel printer, control device and electrical console are integrated, which improves the structure level of the whole machine. Multiple mixers can realize on-line control, with a high degree of automation, which greatly improves the scientific degree of mechanical equipment management and improves the working efficiency of the mixing station.
