1. When the
SNC series bolted cement silo is working, it must be erected by a special crane, and then placed on the prefabricated concrete foundation, and the verticality of the
SNC series bolted cement silo with the horizontal plane after being erected should be checked. , And then weld its bottom to the foundation embedded parts firmly.
2. After the storage bin is fixed, the bulk cement truck will transport the cement to the construction site, and then connect the delivery pipeline of the bulk cement truck to the feed pipeline of the
SNC series bolted cement silo, and the gas pressure of the bulk cement truck will The cement in the tank is transported to the cement silo.
3. In the process of conveying cement to the storage bin, the operator should continuously press the button of the vibration motor of the dust collector to shake off the cement attached to the dust collector bag to prevent the bag from being blocked and bursting.
4. Once the cloth bag is blocked and the pressure in the warehouse exceeds the safety pressure of the pressure safety valve on the top of the warehouse, the pressure safety valve can be opened to release the pressure in the warehouse to prevent explosion accidents.
5. Through the high and low material level, the full and lack of material can be observed.
6. When the cement conveying device fails, first close the manual discharge valve at the bottom of the cone to prevent cement from overflowing and causing waste
